Learning from the mistakes and hassles we had last time (when we flew around Hawaii), I had all the route legs prepared on a single sheet of paper to make loading the Flight Management Computer (FMC) easier. I also had check lists prepared in a small format print out (A6 size?) and was a lot more familiar with the systems this time round. We started the session parked at KGJT with the cockpit turned on and ready for us to start. We programmed the FMC, verified it all and then I did the take off, turning on the autopilot not long after we were in the air. On the way out we enjoyed some good views of the mountains in the area, although it was a little hazy and not totally clear. During the run to KDEN, we reviewed the approach and tweaked a few parameters to give us a good run into the landing. I took over from the autopilot a few way points out and handflew onto the localiser before pulling off an acceptable landing on R/W 07 using the VASI lights to help me get my approach right. It wasn’t great (a little high, floated and went long), but it was WAY better than my abysmal attempts at Kona. Once we were parked at a gate we reprogrammed the FMC and reviewed the approach into Aspen. This would be interesting as it is a visual approach at altitude and surrounded by mountains. This time it was Carlo’s turn, so he taxied us out to R/W 08 and we left KDEN with a hard, climbing right hand turn to get us onto the course I’d set up.

It’s not far between KDEN and KASE so we were soon getting ready to run the approach, descending and slowing down as we commenced the turn onto runway heading. Carlo flew us in for a good landing despite being a bit high & fast at the start of the turn. We pulled up reasonably well and turned in for the terminal. Another FMC reprogramming session had us ready to leave KASE and head for KLAS. Carlo did the take off and we had another climbing right turn on departure although this one was a little wider as it took us around a mountain. We were watching the peak on our right as we slowly climbed above it, even with a good climb rate. Once established on our course towards KLAS, we engaged the autopilot and reviewed the approach. After a few adjustments to the speed & altitudes, we set the autopilot to fly based on the FMC, not the MCP controls. At this point we “cheated” and engaged the “fast forward” system, putting the sim on 8x normal speed. Gotta love that function on a long flight.

Soon we were at top of descent and not long after I was taking over control for the landing into Vegas. As I came around onto the initial point for the ILS, I could see the runway in the distance so I switched over to making a visual approach. This landing was better than any yet and I had us nailed on glideslope (according to the VASI) for most of the way down. I must admit I got a bit of a shock when Carlo told me that the autothrottles were off and we’d been easing down with the engines just above idle. Ooops. This could explain why I was a little low on approach at the end and wound up touching down fractionally short of the preferred touch down point. Oh well – for me it was a bloody good landing so I was pretty happy with that. After landing we taxied to a gate, shutdown and then switched everything off, leaving the sim ready for the customers tomorrow morning. It was a great session and I feel like I’m improving, although I have a very long way to go before I’ll be confident with the systems, the FMC and handling the beastie itself. We both made mistakes and need to review our CRM and processes (“What do you mean we had no auto throttles????”) but things are getting better. Like the last session, we had the cockpit video system recording us but, sadly, this time it stopped not long after departure from KASE. Instead of recording to the hard drive and then being burnt to a DVD, it was set to burn direct to DVD, so it stopped when it ran out of space. DOH! We also had Live ATC playing in the cockpit thanks to Carlo’s laptop, although that had a problem with its ‘net connection and dropped out part way through. It certainly did help add to the experience while it was working.

A full set of photos can be found at my photo gallery. Meanwhile, we’re already talking about the next session – this time we think it’ll be somewhere in Europe. ]]> http://blog.flymefriendly.com/2008/11/in-the-mountains-of-simulated-madness/feed/ 3